Web Results
Content Results
  • List of Perkins engines

    serch.it?q=List-of-Perkins-engines

    In this List of Perkins engines, family type refers to the two letter designation Perkins Engines gives each engine. This nomenclature was introduced in 1978 under Perkins' new engine numbering scheme, where the family type is encoded in each unique serial number. Engines that went out of production prior to 1978 may have been retroactively assigned a family type to expedite parts support (this is the case with the Perkins 4.107). Some engines never entered production, such as the Perkins 4.224, but were assigned a family type. In the early years, Perkins gave names to their engines, beginning with the smallest Wolf. The larger Lynx and Leopard followed (all four-cylinders), with the 1937 P6 was intended to be called the "Panther." After a lawsuit from motorcycle manufacturer Phelon & Moore, Perkins dropped the Panther (and Python and Puma for the corresponding P3 and P4 models) and stuck to abbreviations from then on. Perkins was sold by Massey Ferguson's parent Varity Corporation in 1998, and is now a fully owned subsidiary of Caterpillar Inc. + Perkins engine Designations Family type Code Engine Ref no. Production Dates NotesAA 1004-4 3990 cc, 100 x 127 mm bore and stroke. Also sold as the Phaser 90, it has . Also known as 4.40 AB 1004-4T Turbocharged version of the AA, sold as the Phaser 110T (110 hp). Also known as T4.40 AC 1004-4T AD 1004-4TW With intercooler, sold as the Phaser 120Ti. Also known as C4.40 AE FCC4.40 Federal emissions AF 1004-40S Gasoline engine. AG 1004-4 AH 1004-4T AJ 4.401 AK T4.401 AL CCA4.401 AM CCW4.401 AP N4.401 Narrow front end. AQ TN4.401 AR 1004.42 Sold to HYSTER corp. for use in small to medium lift trucks. AS H4.421 AT CCAN4.401 BA 4.20 Produced as a Joint venture between Perkins, UK government and the Austin Rover Group. Based on the Austin Rover O series engine this engine had major parts produced at Longbridge by Austin Rover with final assembly by Perkins. It was entirely designed by Perkins who also sold it to external customers. It was used by Austin Rover in the Austin Maestro and by LDV Group in their 2.5-tonne van. BB T4.20 As with the 4.20. Used by Austin Rover in the Montego and later the Maestro.| CA P3 1953-11 to 1967-03 Three-cylinder diesel engine. Engine serial is a seven digit number beginning with 1000251. 67,433 engines were produced. Uses a timing chain. none F3 1957-08 to 1964-10 Three-cylinder diesel engine. Built for Ford, with Simms injector pump. (Ford supplied all the block and head castings). CB 3.144 CC P3.144 1957-03 to 1969-05 Three-cylinder, 144 cu. in. (2.4 L) diesel engine. Family type is CC. 2691 United Kingdom-built engines and 454 France-built engines were produced for Massey Ferguson; 30,346 were produced for other customers. CD 3.152 used in many Lincoln brand mobile welders. none F3.152 1962-02 to 1964-09 Three-cylinder, 154 cu. in. (2.5 L) diesel engine. No family type. Built for Ford (Ford supplied the block & head castings) 64,496 made. Fitted to the Super Dexta CE D3.152 Direct-injection versions of earlier 3.152 engine types. Produced for Massey Ferguson and other customers including Volvo (tractors) CF G3.152 G denotes "gas" or " gasolene" version. Spark-ignition variant of D3152 produced for common installation in Fork lift truck where D3152 engine was specified. CG P3.152 CJ 3.1522 Development of D3152 using Perkins "squish lip" piston to give improved driveability of engine in emissions sensitive applications such as Fork Lift. CM 3.1524 Uprated D3152 engine. Board decision named this engine .4 despite no .3 ever existing due to recent launch of 6.354.4 and its success. CN T3.1524 Turbocharged version of 3.152.4. Initially used by Lindner, later by Massey Ferguson. CP 903-27 CR 903-27T CS 903-25 CT 903-27S DC 1103C-33 DD 1103C-33T DE 1103C-33TA DF 1103B-33 DG 1103B-33T DJ 1103A-33 DK 1103A-33T EA 4.99 Four-cylinder, 99 cu. in. (1.6 L) diesel engine. Wet sleeves, used in London Taxis. EB 4.107 Four-cylinder, 107.5 cu. in. (1.8 L) diesel engine. Wet sleeves. Commonly used in marine applications. EC T4.107 Four-cylinder, 107.5 cu. in. (1.8 L) turbocharged diesel engine. Wet sleeves. Very rare (perhaps never produced). ED 4.108 Four-cylinder, 108 cu. in. (1,760 cc) diesel engine. Dry sleeves. An evolution of the 4.99 and 4.107. Almost 500,000 engines produced between the 4.99, 4.107 and 4.108. Used extensively in vans and light trucks, Ford Transit, Bedford CA, some cars Opel Blitz, Alfa Romeo F12/A12, Alfa Romeo Giulia, SEAT 131. Also used extensively in marine applications, farm equipment and Mustang/OMC skid-steer loaders. GA 4.154 Four-cylinder, 154 cu. in. diesel engine. Designed with sister engine 6.231 both produced in England. Later produced by licensee Toyo Kogyo (Mazda)under model # 4.154-200 series same as Mazda XA series. Later developed into 4.165/6.247 family. GB 4.135 Based on 4.154.Produced only by Toyo Kogyo. (Mazda) Variant used in '82-'84 B2200 trucks and in '83-'84 Ford Ranger Diesels. Pushrod, dry sleeves and gear drive GC 4.182 Based on 4.154. Produced only by Toyo Kogyo (Mazda)GD 4.25 GE 4.30 GG 402D-05 2-cylinder 0.51-litre / 13.7 Bhp Industrial EngineGJ 403.10 3 Cyl Tier 3 EPA rated Engine replaced the 103.10 in the Caterpillar Arr# 145-6693 like in mini ex 301.8. HA 4.165 Four-cylinder, 165 cu. in. diesel engine. Based on 4.154. Assembled by Perkins in Hannover for VW LT van, and by Enasa in Spain for various vehicles including the Nissan Patrol (as the MD27) JA P4 1937-06 to 1967-05 Four-cylinder diesel engine. 97,390 engines were produced. JB 4.192 1958-05 to 1972-01 Four-cylinder, 192 cu. in. (3.1 L) indirect-injection diesel engine. Used in the MF 65 mk.1 tractor. JC P4.192 no information JD 4.203 Four-cylinder, 203 cu. in. diesel engine. none L4 1952-10 to 1961-07 Four-cylinder indirect-injection diesel engine. Commonly used in agricultural applications. No family type. Regarded as grandfather to later 4.236. JE D4.203 Four-cylinder, 203 cu. in. direct-injection diesel engine. Used in the MF 65 mk.2 and MF 165 mk.1 tractors. JF G4.203 Gasoline version. JG 4.2032 LA 4.212 Four-cylinder, 212 cu. in. (3.5 L) diesel engine. Essentially, a 4.236 with a smaller stroke. Used in the MF 165 mk.2 and International Harvester 475 tractors. LCnone This family type was reserved for a 224 cu. in. version of the 4.236, but never entered production. LD 4.236 Four-cylinder, 236 cu. in. (3.9 L) diesel engine. LE G4.236 Four-cylinder, 236 cu. in. (3.9 L) gasoline (or propane) engine. LF 4.248 Four-cylinder, 248 cu. in. (4.1 L) diesel engine. Essentially, a 4.236 with a larger bore. LG 4.2482 This development of the 4.236 series was designed to use the Perkins "squish lip" piston which gave emissions benefits although had lower specific output compared to conventional direct-injection engines. It was used in fork lift applications as an alternative to the smaller swept volume 4.236. LH C4.236 Four-cylinder, 236 cu. in. (3.9 L) "compensated" (lightly turbocharged) diesel engine. LJ T4.236 Four-cylinder, 236 cu. in. (3.9 L) turbocharged diesel engine. LM 4.41 NA 4.270 Four-cylinder, 270 cu. in. (4.4 L) diesel engine, produced from 1958-12 to 1974-04. NB 4.300 Four-cylinder, 300 cu. in. (4.9 L) diesel engine. NC 4.318 Four-cylinder, 318 cu. in. (5.2 L) diesel engine. Used in MF 1080, 595. ND 4.3182 Improved version. Used in MF 698. RA 6.247 Straight 6-cylinder, normally aspirated diesel, only ever fitted to Dodge 50 range in the UK also known as the 'Black' Perkins engine. Most engines made under license by Mazda and used in their light trucks during the late 70s and 80s. RE Perkins 1104 Straight 4-Cylinder Nat asp or Turbo, OEM power unit Fitted to JCB loadall or Thwaites Dumpers PA P6 1938-01 to 1961-04 Six-cylinder, 288 cu. in. (4.7 L) diesel engine, rated at 86 bhp at 2,600 rpm. The highly successful P-series of engines established Perkins' reputation as one of the world's major builders of diesel engines. PB 6.288 1960-04 to 1964-01 Six-cylinder, 288 cu. in. (4.7 L) diesel engine, . PC 6.305 1959-03 to 1970-02 Six-cylinder, 305 cu. in. (5.0 L) diesel engine. Enlarged version of P6 using CAV DPA injection pump. none C.305 1958-06 to 1961-05. Horizontal version of 6.305, developed in conjunction with Commer Cars Ltd. none 6.306 1965-12 to 1975-12. Six-cylinder, 306 cu. in. (5.0 L) diesel engine. Short-stroke 6.354, stroke same as 4.212. Possibly only used in Australian Chamberlain tractor. Not to be confused with the 6.305. unknown R6 1953 to 1962 Six-cylinder, 340 cu. in. (5.56 L) diesel engine, rated at 108 bhp at 2,700 rpm and 240 lb ft at 1,500/1,750 rpm. Rushed development led to major problems with this engine, with consequent damage to both Perkins' reputation and finances. Although, the problems were solved quite quickly and the engine was relaunched as the R6 Mk2, with a reduced rating of 104 bhp at 2,500 rpm. Sales never recovered after the early problems and only 33,800 engines were built before production ended in 1962. none S6 1939-05 to 1962-10 Six-cylinder, 377 cu. in. (7.4 L) diesel engine. Very similar to the highly successful P6, the S6 was rated at 115 bhp at 2,000 rpm for passenger vehicles and 105 bhp at 1,800 rpm for goods vehicles. TC 6.354 1960 to 1996 Six-cylinder, 354 cu. in. (5.8 L) diesel engine, initially rated at 112 bhp at 2,800 rpm and later at 120 bhp. Highly successful engine which restored Perkins' reputation after the problematic R6. Developments of the engine, including turbocharged versions remained in production until 1996, by which time over a million had been built at Peterborough plus substantial numbers in other countries. TD H6.354 Six-cylinder, 354 cu. in. (5.8 L) horizontal diesel engine. A slant engine, used in marine applications. Very rare. TE T6.354 Six-cylinder, 354 cu. in. (5.8 L) turbocharged diesel engine. TF HT6.354 Six-cylinder, 354 cu. in. (5.8 L) horizontal turbocharged diesel engine. Very rare. TG 6.3541 TH T6.3541 TJ 6.3542 TK C6.3542 TP T6.3543 TR 6.372 Larger bore version of 6.354. Same size bore as 4.248. Only used in MF combine. TT TC6.3544 TU T6.3544 TV T6.3724 Larger bore version of 6.354. Same size bore as 4.248. Only used in MF combine. TW 6.3544 Horizontal version used in some British Rail diesel multiple units, e.g. classes 158, 165, 166 TX C6.3544 TY H6.3544 TZ HT6.3544 XA V8.510 V-8, 510 cu. in. (8.4 L) diesel engine. XB TV8.510 V-8, 510 cu. in. (8.4 L) turbocharged diesel engine. XC V8.540 V-8, 540 cu. in. (8.8 L) diesel engine. XE TV8.540 V-8, 540 cu. in. (8.8 L) turbocharged diesel engine. XG 1103D-E33 Electronic GoverningXH 1103D-E33T Electronic Governing / TurbochargedXJ 1103D-E33TA Electronic Governing / Turbocharged / Air to air charge cooledXK 1103D-33 XL 1103D-33T TurbochargedXM 1103D-33TA Turbocharged / Air to air charge cooledYA 1006-6 5985 cc, 100 x 127 mm bore and stroke (as per "AA" four-cylinder). Also known as the Phaser, continued Perkins "one litre per cylinder" designYB 1006-6T Turbocharged version of the above, also known as the Phaser 160T for its max powerYC 1006-6T YD 1006e-6TW Intercooled model with max power, marketed as the Phaser 180TiYF 1006-60S YG 1006-60 YH 1006-60T YJ 1006-60TA YK 1006-60TW ZA V8.640 V-8, 640 cu. in. (10.5 L) diesel engine. ZB TV8.640 V-8, 640 cu. in. (10.5 L) turbocharged diesel engine. none T12 Twelve-cylinder diesel engine, two banks of six cylinders arranged in a V . Produced for marine use during the war, Perkins used one on a standby generator at the factory which is now in preservation. none 2000 Series Electronic (Stafford) Six-cylinder, 12.5L, 15L, & 18L turbocharged, charge-cooled diesel engines. none 2000/3000 Series Mechanical (Shrewsbury) none 4006 Series Diesel Six-cylinder, 23L turbocharged charge-cooled diesel engine. none 4008 Series Diesel Eight-cylinder, 30.5L turbocharged charge-cooled diesel engine. none 4012 Series Diesel Twelve-cylinder, 46L turbocharged charge-cooled diesel engine. none 4016 Series Diesel Sixteen-cylinder, 61L turbocharged charge-cooled diesel engine. none 4006 Series Gas Six-cylinder, 23L turbocharged charge-cooled spark-ignition gas engine. none 4008 Series Gas Eight-cylinder, 30.5L turbocharged charge-cooled spark-ignition gas engine. none 4012 Series Gas Twelve-cylinder, 46L turbocharged charge-cooled spark-ignition gas engine. none 4016 Series Gas Sixteen-cylinder, 61L turbocharged charge-cooled spark-ignition gas engine. }

  • GMC V6 engine

    serch.it?q=GMC-V6-engine

    GMC Truck produced a unique 60 degree V6 engine family from 1959 through 1974, in gasoline and Diesel versions. V8 and V12 derivatives of the basic design were also produced. Examples of this engine family were found in pickup trucks, Suburbans, heavier trucks and motor coaches. V6 engines were produced in 305, 351, 401 and 478 cubic-inch (5.0, 5.8, 6.6, and 7.8 respectively liter) displacements, with considerable parts commonality. During the latter years of production, versions with enlarged crankshaft journals were manufactured as well. GMC produced a 60° V8 with a single cam shaft using the same general layout (bore and stroke) as the 478 V6. The 637 V8 was the largest displacement production gasoline V8 ever made for highway trucks. The largest engine derived from the series was a "Twin Six" V12, which had a unique block and crankshaft, but shared many exterior parts with the 351. Diesel versions of the 351, 478 and 637, advertised as the ToroFlow, were also manufactured. These engines had no relationship to the well-known Detroit Diesel two-stroke engines produced by General Motors during the same time period. All versions of the GMC V6 used a six-throw crankshaft, which when combined with the 60 degree included cylinder angle, produced a smooth running engine without any need for a balance shaft. Spark plugs were located on the inboard side of the cylinder heads and were accessed from the top of the engine. This position allowed for shorter spark plug wires and kept the spark plugs away from the hot exhaust manifolds, something which was emphasized in sales literature. It was also perceived as easier to access them for maintenance. These GMC V6 engines were noted for durability, ease of maintenance and strong low RPM torque.

  • Chevrolet Monza

    serch.it?q=Chevrolet-Monza

    The Chevrolet Monza is a subcompact, four-passenger automobile produced by Chevrolet for the 1975–1981 model years. The Monza is based on the Chevrolet Vega, sharing its wheelbase, width and 140-CID (2,300 cc) inline-four engine. The 1975 Monza 2+2 was designed to accommodate the GM-Wankel rotary engine, but due to mediocre fuel-economy and emissions-compliance issues the engine was cancelled, and a fuel-efficient, 4.3-liter & 5.7-liter V8 engine option was substituted. The name was also used for the Latin-American version of the Opel Ascona C. The Monza 2+2 and Monza Towne Coupe competed with the Ford Mustang II and other sporty coupes. General Motors' H-body variants, the Buick Skyhawk and Oldsmobile Starfire, were produced using the Monza 2+2's body with grill and trim variations and Buick's 3.8 liter V6 engine. The Pontiac Sunbird variant was introduced the following model year, eventually offered in both Monza body styles. The Monza nameplate originated in mid-1960 for the sport version of the Chevrolet Corvair.

Map Box 1