Web Results
Content Results
  • Honda TRX 420


    The Honda TRX 420 is an All-terrain vehicle (ATV). It is widely used on farms and can also be used for many other activities. It is manufactured by Honda. TRX 420 FM

  • Honda Odyssey (ATV)


    Honda Odyssey was a line of single-seat four-wheel all-terrain vehicles produced by the Honda Corporation between 1977 and 1989. 1979 Honda Odyssey FL250 ca. 2000. Note the engine has been replaced with a Polaris 440cc Snowmobile engine.

  • Honda ATC250R


    thumb The ATC250R is a high-performance ATC produced by Honda from 1981 to 1986. Early models (1981-1984) used an air-cooled, 248 cc single-cylinder two-stroke engine. Fuel was fed through a 27 mm (1981-1982) or 30 mm (1983-1984) round-slide carburetor. Power was accessed through a close-ratio five-speed transmission with a manual clutch. Later models (1985-1986) used a liquid-cooled, 246 cc single-cylinder two-stroke engine with a 34 mm round (1985) or flat (1986) slide carburetor. The biggest engine downfall was the lack of a power valve. The 85-86 models were upgraded with a close-ratio six speed transmission again with a manual clutch. All model years were fully suspended and adjustable, using air-assisted front forks and a single, remote reservoir gas-charged rear shock. 1981-1982 models offered 6.7 inches of front suspension travel and 4.3 inches in the rear, 1983-1984 offered 8.7 inches in front and 8.1 inches rear, while 1985-1986 gave 9.8 inches of travel. All model years also used a gear-driven counter-balancer to reduce engine vibration. Dual disc brakes were used on all model years, with the exception of the 1981, which used a front disc and a rear drum. The 1981+1982 ATC250R (1st gen) marked a milestone in off-road history, as it was the first two-stroke ATV designed specifically for racing. While ATV racing was in its infancy, racers had to rely on Honda's ATC110 and ATC185 models on the racetrack. Both of these four-stroke models were sluggish and poorly suspended when compared to the 2-stroke ATC250R. The 1983+1984 ATC250R (2nd gen)incorporated many improvements over the prior 1982 model, mainly with the introduction of Pro-Link suspension, folding foot pegs, a larger fuel tank, slightly longer travel suspension in front and rear, and other improvements. The 1985+1986 ATC250R (3rd gen Liquid Cooled)was the last Generation model year offered for sale in the United States, after an agreement between manufacturers and the Consumer Product Safety Commission to cease production on all 3-wheeled ATVs. This was the result of thousands of legal battles regarding safety issues and high accident rates. The 1986 Honda TRX250R Fourtrax was the 4 wheeled brother of the ATC250R, with an engine that was virtually the same (with slightly less horsepower). Honda also created three other machines of similar size for their HRC race team, but these were not production models. These machines are the ATC125R, ATC200R, ATC300R, ATC350R, ATC400R, ATC480R, and ATC500R. Of these machines, the ATC200R was most popular. Rumour has it that before the cease of production, Honda was building an ATC500R for production. The Honda ATC250R's competition came largely from the Kawasaki KXT Tecate 250 and Yamaha Tri-Z 250, and to a smaller extent from companies such as Tiger ATV. The ATC250R is often compared to the Honda ATC350X, which was a 4 stroke high performance 3 wheeled ATV better suited to recreational riding than racing. It is rumored that a large collection of ATC250R's and other 3 wheelers exist in an old barn in Parma NY, as well . The ATC250R was due to be updated in 1987 with features such as white plastic, redesigned logo, and possibly keyed ignition. While various parts have recently turned up, a complete 1987 ATC250R has yet to be discovered. Multiple sources indicate that dealers where instructed to remove the motors and other parts common with prior models and then cut the frames in half to prevent their sale. Within the 3 wheeler community, the search continues for these models.

Map Box 1